Industrial Manufacturing
Encompassing a broad array of segments, industrial manufacturing ranges from vehicle assembly plants to small custom machinists. Regardless of your size, SES can help you manage your maintenance spend by providing a great service at a competitive price.
We’ve helped customers in the industrial manufacturing space in a variety of way; from one-time cleanings, to routine maintenance and outages, to providing confined space rescue teams, and more. Let us know what you need, and we can help.
Here are a few examples of the types of work that we can perform according to your industry segment:
Automotive
Tank Cleaning
Our vacuum trucks, waterblasters, and automated equipment can clean all tanks that you might have at your facility. We are hazmat certified, and can handle both non-regulated and regulated products.
Phosphate System Cleaning
We vacuum out all the heavy sludge, then blast out walls and floor of tank with a waterblaster. Then we use high pressure to clean the header piping system, this is done with our 40,000 psi waterblasters. This is very effective in cleaning out rock hard phosphate material.
E-Coat Tanks
We vacuum all sludge out of bottom of your e-coat tank, and blast it clean with a 10k water blaster. E-Coat tanks have a rubber liner, so we take care not damage the liner.
Swarf and Chip Management and Removal
We can clean the pits under the grinder system. Our high volume vacuum trucks can remove these heavy materials.
Fabricated Metal
Quench Tanks
We neutralize the material in the quench tank, then clean and dispose of the material with our high powered vacuum trucks.
Stacks
We use a two dimensional waterblasting tool on a lance to clean out your stacks.
E-Coat Chains
We use either a 10k or a 20k psi waterblaster to remove the material from the chain.
Sludge Pits
We clean your sludge pits by vacuuming out the material and then waterblasting or firehosing them clean.
Paper and Paperboard Products
Digester Cleaning
We vacuum out all the sludge and solids from your digester, then we either pressure wash or firehose down the sidewalls and floors.
Evaporators
Whether your evaps have tubes or plates, we have automated cleaning equipment that can enhance the quality of the clean and also drastically increase the safety of the job.
Green, Black, or White Liquor Lines
We manage these difficult to clean lines by using a variety of different pressure water blasters, and also custom designed nozzles to blast through the layers of caked on material.
Tank Cleaning
We can clean any type of tank that you may have in your facility, including liquor tanks, processed water tanks, sand filters, etc. We often use our automated tooling to clean tanks without requiring tank entry.
Clarifiers
We pump down the clarifiers, and then enter the tank to clean the weirs and the bottoms of the center well. Then we can vac and wash down anything else you need.
Softener Building
We clean the troughs and weirs in your softener building with our waterblasters. We have specialize equipment that can clean the weirs out thoroughly.
Sump Cleaning
We vac and wash out your sumps. We've done a lot of this work, and are familiar what it takes to get your sump clean just the way you want it.
Paper Pulp Cleaning
We can clean the paper pulp out of your tanks. If your tanks are clay tile, we use a high volume low pressure water wash to ensure the tiles are not damaged.
Boilers
We clean all parts of your boiler system, including vacuuming out the u-drains, waterblasting the klinkers, air heater basket washes, precipitator washes, and penthouse cleanings.
Plastic and Rubber Products
Baghouses
Typically, these have hoods or vents that pulls in dust or gas off the product. We can go in and change the filters, vacuum out any dry material, and use low pressure to wash the inside of the system.
Hoppers
When we are cleaning the baghouse, we clean all the way down to the hoppers, and vacuum them out.
Sand Filters
If you want to recharge or change the sand media, we can vacuum out the filters and wash them down.
General Tank Cleanings
Our vacuum trucks, waterblasters, and automated equipment can clean all tanks that you might have at your facility. We are hazmat certified, and can handle both non-regulated and regulated products.
Heat Exchangers
Using advanced automated equipment, we use high pressure water to clean each hole in your heat exchanger.
Silo Cleaning
Waterblast the interior of the silo with automated equipment, or we can just waterblast and vacuum it out from the inside of the silo.
Printing and Publishing
Tank Cleanings
Our vacuum trucks, waterblasters, and automated equipment can clean any tank that you have at your facility, such as sulfuric acid tanks.
Waste Ink
We can come in and vacuum out tanks or totes that contain waste ink. We also dispose of this waste for you.